If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Samsung CLX-6260FW printer prints blank pages.. most of the time
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Hi. Remove the right hand cover. The solinoid is in between the two motors about about 2/3rds of the ways up. 2 screws and it comes out.
Regards Gordie
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Originally posted by Bojan2S
No, I am still investigating.
Can you tell me exactly where this actuator is? In the past I had #A1-4112 Error, and I fixed this by inserting new cushion.. and error is no more. Are you suggesting this may be the problem again?
Thanks,
Bojan
Hi,
I had the same problem with 6260FW. I've replaced cushion before, but this time it was a problem with that small spring in acutator (it looks like it was too weak). I've shortened it around 3-4mm and printer is working like new samsung.jpgThis is a picture from internet, just to show which spring.
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Originally posted by bax001
Hi,
I had the same problem with 6260FW. I've replaced cushion before, but this time it was a problem with that small spring in acutator (it looks like it was too weak). I've shortened it around 3-4mm and printer is working like new
[ATTACH=CONFIG]50219[/ATTACH]This is a picture from internet, just to show which spring.
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Originally posted by Crowfeather
If you were having a problem with the actuator it should give the error code.
Honestly, its worth just buying a replacement they are a few dollars, if that, and they were revised with better material to separate.
If there is a problem for example with pad, then yes, but in my case it was partially working (it was printing usually only one page) and you could hear clicks that it was skipping something.
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Originally posted by Bojan2S
Well, it is personal now between me and this printer, economy is irrelevant :-)
I don't think toners are the problem.. printer was working fine for years, and it started to misbehave after half of black toner in installed cartridges is spent.. and I tried with new cartridges, the intermittent behavior is the same.
The problem here is insufficient documentation, and imposed attitude by Samsung (and many other manufacturers/products): "easy repair - just replace modules, if it doesn't work just throw away, it's not worth the effort".
This philosophy doesn't work for me.
And, if I solve this problem, my effort could potentially help someone else.. so my time and effort will not be wasted (I hope).
So what it was?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
After a year of not using my printer (new processor board, new laser unit, which did not help then), I tried again and it worked! .. for a while.. then I am back to the original problem.
Tried with new toner cartridges, same.
I am now concentrating on HV unit.. maybe the problem is there?
Re: Samsung CLX-6260FW printer prints blank pages.. most of the time
Me neither :-)
Funny thing is, no one had similar problem.. or?
And even funnier, I just slide opened toner cartridge tray, rocked cartridges a bit, closed it and it prints OK again.
So it seems I have a problem with HV contacts (or only one, which is common to all cartridges. Grounding on HV card?
Comment