If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
As the title suggests, where do you dispose of waste toner/developer from e.g. a developer change? The company that I purchase my parts from doesn't have a collection program and I can't find any relevant information online. I assume it is not the best to just throw it in the recycling bin? I have been dropping it off at a computer store where they have a laser cartridge recycling bin (not just dumping the powder in the bin of course) but I am not sure if this is the best choice.
If you are konicaminolta dealer or direct you can intro your customers to the green planet program..All KM suppies (parts and consumables) can be put into a box, when box is full throw UPS label on and arrange a pickup. Cartridges go to recycling center, tech doesn't need to carry used parts around until he can find a dumpster. E
If you are konicaminolta dealer or direct you can intro your customers to the green planet program..All KM suppies (parts and consumables) can be put into a box, when box is full throw UPS label on and arrange a pickup. Cartridges go to recycling center, tech doesn't need to carry used parts around until he can find a dumpster. E
I am not a dealer, I own a print shop. I just replaced the cyan developer and I was wondering if there was anything like that in my country/in Europe. I was not aware of this program, thank you for bringing it to my attention. I have dumped the waster cyan toner/developer mixture into an empty K toner bottle, I will ask them if they accept something like this.
If you have a contract through KM or one of its dealers you can use the program..it's free for our customers.
About. Konica Minolta
I do not have a contract with through KM or one of its dealers, but I do buy parts from a KM dealer but like I said I asked and they didn't really know. The website that you've linked to is for the U.S., this seems to be the site for the E.U.:
Home
https://cleanplanet.konicaminolta.eu/index.php
I have sent them an email, hopefully they will reply.
I doubt what we have here is near to USA big dealerships but anyway very good thread.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Most Toner & developer is not as bad as it used to be and can be thrown into trash. Mostly a wax-carbon powder. The developer is mostly iron ore with toner mixed in it.
Of course if anything can be recycled that's always the first choice.
I can think of far worse stuff people people throw into trash without thinking such as batteries, etc,etc
Most Toner & developer is not as bad as it used to be and can be thrown into trash. Mostly a wax-carbon powder. The developer is mostly iron ore with toner mixed in it.
Of course if anything can be recycled that's always the first choice.
I can think of far worse stuff people people throw into trash without thinking such as batteries, etc,etc
And deadly drugs that poison our waters and bodies.
Most Toner & developer is not as bad as it used to be and can be thrown into trash. Mostly a wax-carbon powder. The developer is mostly iron ore with toner mixed in it.
Of course if anything can be recycled that's always the first choice.
I can think of far worse stuff people people throw into trash without thinking such as batteries, etc,etc
It's not "bad" as in something that will harm someone's health if exposed to it, but throwing these tiny styrene acrylic particles in the household recycling bin isn't a great idea either, considering that even things like e.g. plastic yogurt cups don't even get recycled because it isn't profitable for the recycling plant operators, let alone something in the micrometer range.
It's not "bad" as in something that will harm someone's health if exposed to it, but throwing these tiny styrene acrylic particles in the household recycling bin isn't a great idea either, considering that even things like e.g. plastic yogurt cups don't even get recycled because it isn't profitable for the recycling plant operators, let alone something in the micrometer range.
Sent from my Redmi Note 5 using Tapatalk
Guess you answered your own question. Let us know where you end up recycling it because I don't know of anywhere that will take it. Ultimately it will end up in trash. Like I posted this should be least of worry on what is thrown into trash. Toner / Developer is harmless.
If you feel need to do something to help the environment go to a lake or beach and clean the trash up, etc etc
Guess you answered your own question. Let us know where you end up recycling it because I don't know of anywhere that will take it. Ultimately it will end up in trash. Like I posted this should be least of worry on what is thrown into trash. Toner / Developer is harmless.
If you feel need to do something to help the environment go to a lake or beach and clean the trash up, etc etc
Good luck
Look, I just wanted to know if there was a better alternative to what I was already doing. I emailed Konica Minolta through the page that they have for recycling these things, if they reply, I'll let you guys know what I was told.
Else I will just drop it at the laser cartridge recycling bin as I was previously doing.
if u put it in with toner recycling all they want is the plastic so if ur a nice person and dont want to dirty up the process id empty the container yourself into a bin
Comment