Copytechnet.com - Copiers, Printers, and MFPs
/
enFri, 03 Oct 2025 06:21:09 GMTvBulletin60/images/misc/rss.pngCopytechnet.com - Copiers, Printers, and MFPs
/
Sharp BP-71C65
/forum/technical-forums/copier-technical-discussion/sharp/1635008-sharp-bp-71c65
Thu, 02 Oct 2025 22:25:12 GMTI was setting up a new Sharp BP-71C65 .We put the copier on theBP-De15 pedestal and connect the 3 connectors .Turned the copier on and got a...I was setting up a new Sharp BP-71C65 .We put the copier on theBP-De15 pedestal and connect the 3 connectors .Turned the copier on and got a message.Paper deck trouble.Code was U6-55.If I unplug the connectors it works with only tray one but ,when I connect the paper deck connectors,I get the message and can use tray1 and 2.paper deck trays are not there on the display.I hope I explained. it.I am just reaching out for feedback.SharpTSS/forum/technical-forums/copier-technical-discussion/sharp/1635008-sharp-bp-71c65remove blank pages on scan BH C301i and BH C3321
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634987-remove-blank-pages-on-scan-bh-c301i-and-bh-c3321
Thu, 02 Oct 2025 19:39:49 GMT
I have looking for everywhere (scanner properties, admin menu) but I don't find, I wonder if this function exist ...
many regards]]>Konica Minoltalevillageinformatique/forum/technical-forums/copier-technical-discussion/konica-minolta/1634987-remove-blank-pages-on-scan-bh-c301i-and-bh-c33218353ci waste toner almost full message
/forum/technical-forums/copier-technical-discussion/kyocera-utax-copystar/1634983-8353ci-waste-toner-almost-full-message
Thu, 02 Oct 2025 19:34:15 GMTHave a TASKalfa 8353ci that can not seem to get rid of the Waste toner bottle almost full message. Have replaced with a new bottle and still the...
Thanks
Anyway to turn this message OFF?]]>Kyocera, UTAX, Copystarkuby/forum/technical-forums/copier-technical-discussion/kyocera-utax-copystar/1634983-8353ci-waste-toner-almost-full-messageuser code for printer anc copy for BH C301i and BH C3321
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634982-user-code-for-printer-anc-copy-for-bh-c301i-and-bh-c3321
Thu, 02 Oct 2025 19:33:19 GMTKonica Minoltalevillageinformatique/forum/technical-forums/copier-technical-discussion/konica-minolta/1634982-user-code-for-printer-anc-copy-for-bh-c301i-and-bh-c3321Ricoh 6002 wake up
/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634971-ricoh-6002-wake-up
Thu, 02 Oct 2025 18:21:16 GMTHello, all,
I have an issue with a Ricoh MP 6002 that has baffled me. Machine is in stand-by mode and when connected with USB cable, all fans and...
I have an issue with a Ricoh MP 6002 that has baffled me. Machine is in stand-by mode and when connected with USB cable, all fans and PCUs stay turned off (snooze mode). When connected to the network, the machine goes through wake-up cycles approximately every 15 seconds. Machine will wake up (fans run) for 13 seconds and will go to sleep (stand-by) for 2 seconds (approximately). Has anyone discovered a solution? Is there some setting that could be adjusted in SP Mode? I highly doubt it is a network problem, as Lagonda posted in a topic begun on 05-01-18. Any help would be appreciated.]]>Ricoh, Savin, Gestetner, LanierBrendon Stoner/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634971-ricoh-6002-wake-upI need ultimate firmware RICOH MP C3504EX
/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634964-i-need-ultimate-firmware-ricoh-mp-c3504ex
Thu, 02 Oct 2025 17:42:19 GMTCould someone please send me the latest firmware for this Ricoh?Could someone please send me the latest firmware for this Ricoh?Ricoh, Savin, Gestetner, Laniertecnomarco/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634964-i-need-ultimate-firmware-ricoh-mp-c3504exI need ultimate firmware RICOH MP C3504EX
/forum/technical-forums/copier-technical-discussion/canon-aa/1634961-i-need-ultimate-firmware-ricoh-mp-c3504ex
Thu, 02 Oct 2025 17:33:15 GMTCould someone please send me the latest firmware for this Ricoh?Could someone please send me the latest firmware for this Ricoh?Canontecnomarco/forum/technical-forums/copier-technical-discussion/canon-aa/1634961-i-need-ultimate-firmware-ricoh-mp-c3504eximc 3000
/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634959-imc-3000
Thu, 02 Oct 2025 17:20:03 GMTpaper feed trays 1 and 2 have no feed jams. Code 03 and 04. The motor that drives those does not turn. The motor was replaced and the io board was...paper feed trays 1 and 2 have no feed jams. Code 03 and 04. The motor that drives those does not turn. The motor was replaced and the io board was swapped with no change. Ricoh said its probably a wiring harness. Has anyone had this issue. The machine only resets the jam by opening and closing the paper drawers. thanks for any input.Ricoh, Savin, Gestetner, Lanierchargeroller/forum/technical-forums/copier-technical-discussion/ricoh-savin-gestetner-lanier/1634959-imc-3000Old One BH 350 Power supply Fan 9313110042
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634922-old-one-bh-350-power-supply-fan-9313110042
Thu, 02 Oct 2025 15:10:51 GMTLooking for a long gone machine power supply cooling fan par num 9313110042. Machine runs great sporadically before throwing a c5351 code. These...9313110042. Machine runs great sporadically before throwing a c5351 code. These people love this machine and its in real good condition. Any help would be great
]]>Konica Minoltadoc538/forum/technical-forums/copier-technical-discussion/konica-minolta/1634922-old-one-bh-350-power-supply-fan-9313110042Epson Workfor AC5000 - Printer Error 000844
/forum/technical-forums/copier-technical-discussion/epson/1634906-epson-workfor-ac5000-printer-error-000844
Thu, 02 Oct 2025 13:57:09 GMTWe are trying setup a brand new Epson Workforce AC 5000 Incject printers, but it brings Printer Error 000844 while initiating then, shows Turn off...We are trying setup a brand new Epson Workforce AC 5000 Incject printers, but it brings Printer Error 000844 while initiating then, shows Turn off and on the printer, it does not go to the next step. Pls adviseEpsonsubhan/forum/technical-forums/copier-technical-discussion/epson/1634906-epson-workfor-ac5000-printer-error-000844C3070 PF-707m Skew From All Trays
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634831-c3070-pf-707m-skew-from-all-trays
Thu, 02 Oct 2025 09:00:34 GMTHi everyone,
Bit of a weird (at least to me) issue. I installed the machine a month ago. Did the auto centering adjustments for all trays (2 x...
Bit of a weird (at least to me) issue. I installed the machine a month ago. Did the auto centering adjustments for all trays (2 x main body + 3 x PF-707m), got good values within spec ([-200, +200], actually pretty close to 0). Machine was printing fine with consistent, near perfect front and front to back registration (after also doing the both sides adj. manually).
Then out of nowhere, I started getting significant skew from Tray 5 where I keep my 13x19" 350 gsm coated stock (see attached pdf). Note that absolutely nothing had been changed since the day before, where the machine was working just fine. I tried re-doing the auto centering adj. for Tray 5. I do not remember the original value for this tray (but say it was something like -30 or something like that), after doing the adjustment with the paper I had in the tray I got +500 (way out of spec).
I took out the centering sensor in the ADU just before the 2nd transfer roller and cleaned it. It wasn't dirty but I cleaned it anyway. Re-run the adjustment 1-2 times, got values around +350 ¡À30 (better but still way off).
Then I did Tray 1 on the main body with 100 gsm uncoated A3 and while it did change from its original value of something along the lines of a ¡À30 to a -148 (did the adjustment twice and got a similar result), which is still within spec.
Then finally I tried the auto centering adj. on Tray 4 on the PF with 150 gsm 13x19", same type of coated stock as the stuff sitting in Tray 5. Went from a -17 to a -231 and I tried printing out a sheet and it was still skewed from leading edge to trailing edge.
I cleaned the centering sensor multiple times, inspecting the paper path from the PF to the ADU for any pieces of paper or any other debris but couldnt find any.
The manual points out that at this point there is something wrong with the way the PF is installed to the main body (height, tilt of the unit). I loosened the 6 screws that hold the PF to the brackets on the main body and there wasn't any sort of movement of the unit.